Development of accessories for 345 kV oil filled cable

Author

Lee, S.K. ; Choi, S.G. ; Jeon, S.I. ; Park, W.K. ; Ju, T.K.

Author_Institution

Electr. Power Res. & Technol. Centre, LG Cable & Machinery Ltd., Kyeong-buk, South Korea

Volume

1

fYear

1997

Firstpage

503

Abstract

Joints and terminations for 345 kV Oil Filled 1C×2000 mm² cable were developed and tested including BPT (Bellows Pressure Tank) on the bases of various ultra-high voltage technologies. Electrical design was done using Finite Element Method. The performance test certified by KERI (Korea Electrotechnology Research Institute) was performed as the final stage of development. In order to confirm the reliability of long-term usage for 30 years, load cycle test was made for 30 days and residual performance test was successfully performed also. The surveillance system was developed and tested for its operation performance. As a result, the techniques we obtained from this development would be applicable to higher voltage (i.e. 765 kV) level systems

Keywords

cable jointing; finite element analysis; insulating oils; power cable insulation; power cables; 345 kV; KERI; accessory; bellows pressure tank; electrical design; finite element method; joint; load cycling; oil filled cable; reliability; residual performance; surveillance system; termination; ultra-high voltage technology; Bellows; Machinery; Oil filled cables; Petroleum; Power cables; Stability; Stress control; Surveillance; System testing; Voltage;

fLanguage

English

Publisher

ieee

Conference_Titel

Properties and Applications of Dielectric Materials, 1997., Proceedings of the 5th International Conference on

Conference_Location

Seoul

Print_ISBN

0-7803-2651-2

Type

conf

DOI

10.1109/ICPADM.1997.617647

Filename

617647