Application-Specific Customization of Parameterized FPGA Soft-Core Processors

Soft-core microprocessors mapped onto field-programmable gate arrays (FPGAs) represent an increasingly common embedded software implementation option. Modern FPGA soft-cores are parameterized to support application-specific customization, wherein pre-defined units, such as a multiplication unit or floating-point unit, may be included in the microprocessor architecture to speed up software execution at the expense of increased size. We introduce a methodology for fast application-specific customization of a parameterized FPGA soft core, using synthesis and execution to obtain size and performance data in order to create a tool that can be used across a variety of tool platforms and FPGA devices. As synthesizing a soft core takes tens of minutes, developing heuristics that execute in an acceptable time of an hour or two, yet find near-optimal results, is a challenge. We consider two approaches, one using a traditional CAD approach that does an initial characterization using synthesis to create an abstract problem model and then explores the solution space using a knapsack algorithm, and the other using a synthesis-in-the-loop exploration approach. We compare approaches for a variety of design constraints, on 11 EEMBC benchmarks, using an actual Xilinx soft-core processor, and for two different commercial Xilinx FPGA devices. Our results show that the approaches can generate a customized configuration exhibiting roughly 2x speedups over a base soft core, reaching within 4% of optimal in about 1.5 hours, including complete synthesis of the soft-core onto the FPGA, compared to over 11 hours for exhaustive search. Our results also show that including synthesis-in-the-loop, compared to a traditional CAD approach, improved speedups by an average of 20% when size constraints were tight. The approaches may also be applicable to soft-core processors targeted to ASICs in addition to FPGAs