Limited feedback power loading for OFDM

Orthogonal frequency division multiplexing (OFDM) is a practical technique for communicating over broadband channels in multi-path fading environments. It is well known that varying the power allocation from frequency tone-to-frequency tone, commonly called power loading, can improve capacity or error rate performance. Unfortunately, the implementation of power loading is complicated by the fact that the transmitter must have knowledge of the forwardlink channel. This assumption is often unrealistic, particularly in systems using frequency division duplexing (FDD). In this paper we present a limited feedback approach for power loading OFDM symbols. In this approach, the receiver, which is assumed to have full forwardlink channel knowledge, designs a power loading vector and conveys it to the transmitter over a limited rate feedback channel. The technique uses a codebook of power loading vectors known to both the transmitter and receiver. We design limited feedback schemes for error rate optimized and capacity optimized power loading. We show how to design quantizers using iterative optimization techniques from the theory of vector quantization for the case of error rate selection. In the capacity case, we characterize optimal feedback schemes for asymptotic signal-to-noise ratio (SNR) scenarios and present a simple method called multi-mode power loading that uses a codebook that switches subcarriers off and on. Simulation results show that the limited feedback techniques provide performance close to perfect channel knowledge power loading.