DocumentCode
1663717
Title
Notice of Retraction
Design method of air drying dehumidification system for main cables of suspension bridge
Author
Jia, Dai-yong ; Miao, Xiao-ping ; Fan, Liang-kai ; Geng, Shi-bin ; Han, Xu
Author_Institution
Engineering Institute of Engineer Corps, PLA University of Science and Technology, Nanjing 210007, China
fYear
2011
Firstpage
1
Lastpage
4
Abstract
Notice of Retraction
After careful and considered review of the content of this paper by a duly constituted expert committee, this paper has been found to be in violation of IEEE´s Publication Principles.
We hereby retract the content of this paper. Reasonable effort should be made to remove all past references to this paper.
The presenting author of this paper has the option to appeal this decision by contacting TPII@ieee.org.
This paper focuses on the design method of air drying dehumidification system for main cables of suspension bridge. The system is based on an emerging technique which employs dry air to dehumidify the main cables of suspension bridge. The main factors for designing such a dehumidification system were thoroughly analyzed. In addition, the value ranges for parameters related to designing, such as moisture content in the main cable, the air leakage rate along the main cable, were determined. A suspension bridge under constructing was taken as an example for case study. The proper values of several key parameters were determined, such as the length between the air inlets and exhausts, the drying time, the volume rate and pressure of supply air. Finally, the types and sizes of main equipments constructing the dehumidification system were decided.
After careful and considered review of the content of this paper by a duly constituted expert committee, this paper has been found to be in violation of IEEE´s Publication Principles.
We hereby retract the content of this paper. Reasonable effort should be made to remove all past references to this paper.
The presenting author of this paper has the option to appeal this decision by contacting TPII@ieee.org.
This paper focuses on the design method of air drying dehumidification system for main cables of suspension bridge. The system is based on an emerging technique which employs dry air to dehumidify the main cables of suspension bridge. The main factors for designing such a dehumidification system were thoroughly analyzed. In addition, the value ranges for parameters related to designing, such as moisture content in the main cable, the air leakage rate along the main cable, were determined. A suspension bridge under constructing was taken as an example for case study. The proper values of several key parameters were determined, such as the length between the air inlets and exhausts, the drying time, the volume rate and pressure of supply air. Finally, the types and sizes of main equipments constructing the dehumidification system were decided.
Keywords
Belts; Bridges; Corrosion; Design methodology; Maintenance engineering; Structural panels; Suspensions; Dehumidification system; Design method; Drying; Main cable; Suspension bridge;
fLanguage
English
Publisher
ieee
Conference_Titel
E -Business and E -Government (ICEE), 2011 International Conference on
Conference_Location
Shanghai, China
Print_ISBN
978-1-4244-8691-5
Type
conf
DOI
10.1109/ICEBEG.2011.5882808
Filename
5882808
Link To Document