A low noise latching comparator probe for waveform sampling applications

A new latching comparator probe is described The probe is being developed as part of an effort to augment voltage measurement capability in the 10 Hz to 1 MHz frequency range. The probe offers an input voltage range of 10 V, input impedance of 1 MΩ and rms noise referred to the input as low as 55 μV. The probe´s 3 dB bandwidth is approximately 20 MHz. Total harmonic distortion is as low as -93 dB at 50 kHz. Gain flatness is within ±10 μV/V from 100 Hz to 100 kHz. Improved step settling performance is achieved using a technique that minimizes circuit thermal errors. The probe Is input range can be extended with a frequency-compensated, 1 MΩ input impedance attenuator allowing measurement of pulses in the microsecond regime up to 100 V. The attenuator can be compensated further with a digital filtering algorithm to achieve gain accuracy better than 100 μV/V.