Estimation of stator flux and speed of an induction motor drive

Author

Ahmed, Hameeza ; Sharma, Toshi ; Siddqui, Mohd Zubair ; Singh, Bawa

fYear

2013

Firstpage

1

Lastpage

6

Abstract

In this paper an approach to estimate the speed and the stator flux linkage of a three Phase induction motor by means of an algorithm using dSPACE is proposed. Emphasis is given on reduction of the problem of saturation associated with the pure integrator, while flux estimation. Speed is estimated using a sensor (MOC7811) mounted at the motor shaft. Experimental investigation is carried out on a 1 H.P. motor, a digital inverter controller, an IGBT power module for inverter/chopper and dSPACE Controller Board (CP1104). Real time signals like three phase currents, PWM Pulses, fixed DC link voltage and response of sensor MOC7811 are the input parameters to the Dspace controller board, and using these parameters stator flux and speed is estimated.

Keywords

induction motor drives; insulated gate bipolar transistors; power bipolar transistors; stators; velocity measurement; CP1104; Dspace controller board; IGBT power module; PWM pulses; dSPACE algorithm; dSPACE controller board; digital inverter controller; fixed DC link voltage; induction motor drive speed estimation; inverter/chopper; motor shaft; real time signals; stator flux estimation; stator flux linkage; three phase currents; three phase induction motor; DC Offset; Flux Estimation; Induction Motor Drive; Low Pass Filter (LPF); MOC7811; dSPACE;

fLanguage

English

Publisher

ieee

Conference_Titel

Engineering (NUiCONE), 2013 Nirma University International Conference on

Conference_Location

Ahmedabad

Print_ISBN

978-1-4799-0726-7

Type

conf

DOI

10.1109/NUiCONE.2013.6780142

Filename

6780142