• DocumentCode
    1688153
  • Title

    Five ports ridge waveguide power divider with compact size

  • Author

    Cong Ling Wang ; Qing Yuan Wang

  • Author_Institution
    Sch. of Phys. Electron., Univ. of Electron. Sci. & Technol. of China, Chengdu, China
  • fYear
    2013
  • Firstpage
    320
  • Lastpage
    322
  • Abstract
    A five ports ridge waveguide power divider with compact sizes is proposed and analyzed in this paper. The whole structure of this power divider is symmetrical configuration, so it can easily dominate the phase and amplitude consistence of two output ports. This type of power divider can provide good phase and amplitude consistence between two output ports with low return loss, low insertion loss, high isolation and compact size in C-band. The simulation shows that return loss of the compact divider is below -18 dB between 2.8 GHz and 3.6 GHz, the insertion loss is lower than 0.1 dB, the isolation between two output ports is better than 20 dB, the phase and the amplitude of two output ports is absolutely consistent. In order to match the ridge waveguide, this paper presents the design of a transition from coaxial line to ridge waveguide.
  • Keywords
    power dividers; ridge waveguides; waveguide transitions; amplitude consistence; coaxial line; compact divider; compact size; five-port ridge waveguide power divider; insertion loss; return loss; symmetrical configuration; transition design; Couplers; Insertion loss; Ports (Computers); Power dividers; Three-dimensional displays; Waveguide transitions; compact; five ports; power divider; ridge waveguides; transition;
  • fLanguage
    English
  • Publisher
    ieee
  • Conference_Titel
    Applied Superconductivity and Electromagnetic Devices (ASEMD), 2013 IEEE International Conference on
  • Conference_Location
    Beijing
  • Print_ISBN
    978-1-4799-0068-8
  • Type

    conf

  • DOI
    10.1109/ASEMD.2013.6780784
  • Filename
    6780784