DocumentCode
1720998
Title
Emission and immunity of equipment in the frequency range 2 to 150 kHz
Author
Larsson, E.O.A. ; Bollen, M.H.J.
Author_Institution
EMC-on-Site, Lulea Univ. of Technol., Skelleftea, Sweden
fYear
2009
Firstpage
1
Lastpage
5
Abstract
This paper gives an overview of emission and immunity standards in the frequency range from 2 to 150 kHz. Based on existing standardization a complete set of limits is proposed by the authors. A distinction is thereby made between narrowband emission, broadband emission and recurrent oscillations. The measuring technique is vital to the results. In this frequency range, there are two different sets of standards covering measurement equipment. Due to fact of development of time-domain based instrument we propose to only use this type of instruments for the whole frequency range.
Keywords
electromagnetic compatibility; time-domain analysis; broadband emission; equipment immunity; frequency 2 kHz to 150 kHz; narrowband emission; recurrent oscillations; time-domain based instrument; Distortion measurement; Electromagnetic compatibility; Electromagnetic measurements; Frequency conversion; Frequency measurement; Instruments; Narrowband; Spread spectrum communication; Standardization; Voltage; Power quality; electromagnetic compatibility (EMC); low-voltage equipment; low-voltage networks;
fLanguage
English
Publisher
ieee
Conference_Titel
PowerTech, 2009 IEEE Bucharest
Conference_Location
Bucharest
Print_ISBN
978-1-4244-2234-0
Electronic_ISBN
978-1-4244-2235-7
Type
conf
DOI
10.1109/PTC.2009.5282041
Filename
5282041
Link To Document