Strain and temperature sensors using multimode optical fiber Bragg gratings and correlation signal processing

Author

Lim, J. ; Yang, Q.P. ; Jones, B.E. ; Jackson, P.R.

Author_Institution

Centre for Manuf. Metrol., Brunel Univ., Uxbridge, UK

Volume

3

fYear

2001

fDate

2001

Firstpage

1463

Abstract

A novel type multimode fiber optic Bragg grating (MM-FBG) sensor for strain and temperature sensing has been developed for a power-by-light hydraulic valve monitoring system. The Bragg grating sensor was fabricated by the holographic method in 62/125 μm graded-index silica multimode fiber. The sensor has reflectivity of approximately 35% at 835 nm of peak wavelength. The experiment of strain sensing has been tested by apply axial strains from zero to 1000 με and the temperature sensing test has been done for temperatures from -40°C and 80°C. The strain sensitivity of the MM-FBG is 0.55 pm/με and the average temperature sensitivity is approximately 6 pm/°C

Keywords

Bragg gratings; fibre optic sensors; strain sensors; temperature sensors; -40 to 80 C; -40°C to 80°C; 835 nm; axial strains; correlation signal processing; graded-index silica multimode fiber; holographic method; multimode optical fiber Bragg gratings; power-by-light hydraulic valve monitoring; reflectivity 35%; strain sensitivity; strain sensors; temperature sensitivity; temperature sensors; Bragg gratings; Capacitive sensors; Fiber gratings; Optical fiber sensors; Optical fibers; Optical sensors; Sensor systems; Temperature sensors; Testing; Valves;

fLanguage

English

Publisher

ieee

Conference_Titel

Instrumentation and Measurement Technology Conference, 2001. IMTC 2001. Proceedings of the 18th IEEE

Conference_Location

Budapest

ISSN

1091-5281

Print_ISBN

0-7803-6646-8

Type

conf

DOI

10.1109/IMTC.2001.929449

Filename

929449