Analysis of Internal Quantum Efficiency and Current Injection Efficiency in III-Nitride Light-Emitting Diodes

Current injection efficiency and internal quantum efficiency (IQE) in InGaN quantum well (QW) based light emitting diodes (LEDs) are investigated. The analysis is based on current continuity relation for drift and diffusion carrier transport across the QW-barrier systems. A self-consistent 6-band k ·p method is used to calculate the band structure for InGaN QW structure. Carrier-photon rate equations are utilized to describe radiative and non-radiative recombination in the QW and the barrier regions, carrier transport and capture time, and thermionic emission leading to carrier leakage out of the QW. Our model indicates that the IQE in the conventional 24-Å In_0.28Ga_0.72 N -GaN QW structure reaches its peak at low injection current density and reduces gradually with further increase in current due to the large thermionic carrier leakage. The efficiency droop phenomenon at high current density in III-nitride LEDs is thus consistent with the high-driving-current induced quenching in current injection efficiency predicted by our model. The effects of the monomolecular recombination coefficient, Auger recombination coefficient and GaN hole mobility on the current injection efficiency and IQE are studied. Structures combining InGaN QW with thin larger energy bandgap barriers such as Al_xGa_1-xN, lattice-matched Al_xIn_1-xN, and lattice-matched Al_xIn_yGa_1-x-y N have been analyzed to improve current injection efficiency and thus minimize droop at high current injection in III-nitride LEDs. Effect of the thickness of the larger energy bandgap barriers (AlGaN, AlInN and AlInGaN) on injection efficiency and IQE are investigated. The use of thin AlGaN barriers shows slight reduction of quenching of the injection efficiency as the current density increases. The use of thin lattice-matched AlInN or AlInGaN barriers shows significant suppression of efficien- y-droop in nitride LEDs.