Low-Power Bi-Side Scan Driver Integrated by IZO TFTs Including a Clock-Controlled Inverter

This letter presents a low power In-Zn-O thin-film transistors (IZO TFTs) scan driver including a clock-controlled inverter to avoid the direct current path compared with the conventional diode-connected inverter. The so-called bi-side scan driver is divided into two parts, laying on the two sides of panel to drive the odd lines and the even lines of pixel arrays, respectively. Due to a smaller duty ratio of the clock in the output section than that of clocks in the inner section, only one large size transistor is required for both charging and discharging the scan line, and the discharging speed is faster than that of other merging TFT methods because it is at the bootstrapped state for the whole driving phase. Experimental results show that the output signal of each stage for the proposed scan driver has no distortion and exhibits good noise-suppressed characteristics. It is also verified that the power consumption of the clock-controlled inverter can be significantly reduced compared with the conventional diode-connected inverter.