DocumentCode
1792228
Title
Development of a transformable wheel-track mobile robot and obstacle-crossing mode selection
Author
Wenzeng Guo ; Shigong Jiang ; Chengguo Zong ; Xueshan Gao
Author_Institution
Intell. Robot Inst. of Beijing Inst. of Technol., Beijing, China
fYear
2014
fDate
3-6 Aug. 2014
Firstpage
1703
Lastpage
1708
Abstract
According to the terrain features of irregular environment, a novel mobile mechanism of the transformable wheel-track robot is proposed. The robot can adapt to the irregular environment by transforming the track configuration. The robot mechanism consists of a control box, two symmetric transformable wheel-track units and a sub-arm equipped with a single-direction wheel. The wheel-track unit is composed of two walking gear rings, a double four-bar linkage mechanism and a retractable track. Driven by a servo motor, each wheel-track unit can change its locomotion mode according to the environment. In the paper, the system structure and key mechanical points-positioning method of double four-bar linkage mechanism and retractable track are presented. Meanwhile, the step-climbing ability is analyzed separately in wheel mode and track mode. The result shows that, the structure of the robot is reasonable, which can quickly switch between two modes. If the step height is no more than 80mm, the robot can cross in wheel mode, and in track mode to climb higher steps.
Keywords
collision avoidance; couplings; mobile robots; servomotors; wheels; control box; four-bar linkage mechanism; mechanical points-positioning method; mobile mechanism; obstacle-crossing mode selection; retractable track; robot structure; servo motor; single-direction wheel; step-climbing ability; sub-arm; symmetric transformable wheel-track units; track configuration; transformable wheel-track mobile robot; walking gear rings; Couplings; Force; Gears; Mobile robots; Robot kinematics; Wheels; mobile robot; obstacle-crossing modes; system design; wheel-track;
fLanguage
English
Publisher
ieee
Conference_Titel
Mechatronics and Automation (ICMA), 2014 IEEE International Conference on
Conference_Location
Tianjin
Print_ISBN
978-1-4799-3978-7
Type
conf
DOI
10.1109/ICMA.2014.6885957
Filename
6885957
Link To Document