DocumentCode :
1793671
Title :
Ultra wide band Wilkinson equal power divider using rectangular rings of different impedance
Author :
Kumar, Sudhakar ; Kumar, Manoj
fYear :
2014
fDate :
7-8 Nov. 2014
Firstpage :
49
Lastpage :
54
Abstract :
A novel ultra-wideband (UWB) equal power divider using rectangular rings of different impedances on microstrip line is proposed in this paper. It is demonstrated that 3 dB powers splitting from one input port to two output ports is achieved. In addition, good impedance matching at all the three ports and excellent isolation between two output ports are obtained over the specified 3.1-10.6 GHz UWB range. The simulated and measured return loss is approximate 55 dB at design frequency (6.84 GHz). The average insertion loss, and group delay are around 3dB (including the 3-dB power-dividing insertion loss) and around 0.19 ns over across the UWB. In addition, the isolations between the output ports are approximately 18 dB at design frequency (6.84).
Keywords :
impedance matching; microstrip lines; power dividers; UWB equal power divider; average insertion loss; design frequency; frequency 3.1 GHz to 10.6 GHz; group delay; impedance matching; measured return loss; microstrip line; output ports; power splitting; power-dividing insertion loss; rectangular rings; simulated return loss; ultrawideband Wilkinson equal power divider; Delays; Impedance; Impedance matching; Loss measurement; Microstrip; Ports (Computers); Power dividers; Power divider; Wilkinson power divide; impedance matching; microstrip components; power-dividing ports; ultrawideband (UWB);
fLanguage :
English
Publisher :
ieee
Conference_Titel :
Medical Imaging, m-Health and Emerging Communication Systems (MedCom), 2014 International Conference on
Conference_Location :
Greater Noida
Print_ISBN :
978-1-4799-5096-6
Type :
conf
DOI :
10.1109/MedCom.2014.7005974
Filename :
7005974
Link To Document :
بازگشت