Thick-film inclinometer based on free convective motion of an heating air mass

In this application, a thick-film tilt sensor has been developed, based on heat transfer by natural convection. The device measures internal changes in heat transfer due to the inclination. The device is functionally equivalent to a traditional proof-mass accelerometer. The proof mass in the new thick-film sensor is a gas. The gaseous proof-mass provides great advantages over the use of the traditional solid proof mass. A conditioning electronic circuit amplifies the signal variation induced by the inclination, compensating for the deviation due to the initial asymmetrical values of the bridge arms and their slow variations. Preliminary tests on the first prototypes show an accuracy of about 2% full scale output, repeatability of about 0.2° and resolution better than 0.1° over a ±20° range.