Title :
Dual-mode receiver architecture for Bluetooth and IEEE 802.11b standards
Author :
Anisur Rahman, Md. ; Kamal, Noorfazila ; Bin Ibne Reaz, Mamun ; Hashim, Fazida Hanim
Author_Institution :
Dept. of Electr., Electron. & Syst. Eng., Univ. Kebangsaan Malaysia, Bangi, Malaysia
Abstract :
This article presents a dual mode receiver architecture for Bluetooth and IEEE 802.11b standards at 2.4 GHz. In order to fulfill the increasing demand of data capacity, IEEE 802.11 WLAN is one of the most deployed technologies. On the other hand Bluetooth is imperative for wireless personal area network (WPAN) solution. Both standards use the 2.4 GHz band. The architecture specification was based on the optimization of each building block performance for both standards. The overall receiver gain, noise figure (NF) and IIP3 are 29 dB, 3.5 dB and -12.5 dBm which show satisfactory agreement with receiver performance.
Keywords :
Bluetooth; radio receivers; wireless LAN; Bluetooth; IEEE 802.11 WLAN; IEEE 802.11b standard; WPAN; data capacity; dual mode receiver architecture; frequency 2.4 GHz; gain 29 dB; noise figure 3.5 dB; wireless personal area network; Bluetooth; Gain; Noise measurement; Radio frequency; Receivers; Standards; Wireless LAN; Bluetooth; RF front-end; WLAN; dual-mode; multi-standard; zero-IF receiver;
Conference_Titel :
Computer, Communications, and Control Technology (I4CT), 2015 International Conference on
Conference_Location :
Kuching
DOI :
10.1109/I4CT.2015.7219549
