DocumentCode
182539
Title
Affordable short pulse Marx modulator
Author
Phillips, Robert ; DelPriore, Gerard ; Gaudreau, M.P.J. ; Simpson, Robert ; Casey, Jeff
Author_Institution
Diversified Technol., Inc., Bedford, MA, USA
fYear
2014
fDate
22-24 April 2014
Firstpage
455
Lastpage
456
Abstract
Under a U.S. Department of Energy grant, Diversified Technologies, Inc. (DTI) is developing a short pulse, solid-state Marx modulator. The modulator is designed for high efficiency in the 100 kV to 500 kV range, for currents up to 250 A, pulse lengths of 0.2 to 5.0 μs, and risetimes <;300 ns. Key objectives of the development effort are modularity and scalability, combined with low cost and ease of manufacture. For short-pulse modulators, this Marx topology provides a means to achieve fast risetimes and flattop control that are not available with hard switch or transformer-coupled topologies.
Keywords
pulse generators; pulsed power supplies; Marx topology; affordable short pulse Marx modulator; flattop control; hard switch; short pulse solid-state Marx modulator; time 0.2 mus to 5.0 mus; transformer-coupled topology; voltage 100 kV to 500 kV; Capacitors; Connectors; Diffusion tensor imaging; Modulation; Pulse transformers; Switches; Topology; High Power Solid-State; Marx Modulator; NLC; Solid-State Modulator;
fLanguage
English
Publisher
ieee
Conference_Titel
Vacuum Electronics Conference, IEEE International
Conference_Location
Monterey, CA
Type
conf
DOI
10.1109/IVEC.2014.6857686
Filename
6857686
Link To Document