DocumentCode :
1830566
Title :
A 1.5V high linearity down-conversion mixer for WiMAX applications
Author :
Wei, Hung-Che ; Weng, Ro-Min ; Wang, Jing-Chyi
Author_Institution :
Dept. of Electron. Commun. Eng., Nat. Kaohsiung Marine Univ., Kaohsiung, Taiwan
Volume :
2
fYear :
2010
fDate :
1-3 Aug. 2010
Abstract :
This paper presents a CMOS RF down-conversion mixer for WiMAX applications. The proposed mixer adopts the tansconductance linearization technique realized by using the compound FETs. The mixer with the optimum linearity is suitable for the RF front-end system design. The simulation results reveal that the proposed mixer possesses power conversion gain of 0.44 dB, input third-order intercept point (IIP3) 10 dBm, input 1-dB compression point (P-1dB) -9.8 dBm, and single side-band noise figure (SSB NF) 11.4 dB. The mixer implemented by tsmc 0.18 μm CMOS process consumes 3.02 mA of current from a 1.5 V power supply.
Keywords :
CMOS integrated circuits; UHF frequency convertors; UHF mixers; WiMax; CMOS RF down-conversion mixer; RF front-end system design; WiMAX applications; compound FET; gain 0.44 dB; high linearity down-conversion mixer; input compression point; input third-order intercept point; noise figure 11.4 dB; power conversion gain; simulation; single side-band noise figure; transconductance linearization technique; voltage 1.5 V; CMOS integrated circuits; Compounds; Mixers; Radio frequency; Solids; WiMAX; CMOS; WiMAX; linearity; mixer;
fLanguage :
English
Publisher :
ieee
Conference_Titel :
Mechanical and Electronics Engineering (ICMEE), 2010 2nd International Conference on
Conference_Location :
Kyoto
Print_ISBN :
978-1-4244-7479-0
Electronic_ISBN :
978-1-4244-7481-3
Type :
conf
DOI :
10.1109/ICMEE.2010.5558414
Filename :
5558414
Link To Document :
بازگشت