A Concept for a robot arm with adjustable series clutch actuators and passive gravity compensation for enhanced safety

Passive compliance is useful for robotic arms to ensure their safety. Often springs are used, but they are problematic because they reduce the achievable accelerations and can lead to underdamped oscillations. Torque limiters enhance the safety, but usually the torque limit cannot be adjusted to a desired torque. Electronically adjustable torque limiters, also known as series clutch actuators, have several benefits, especially for robotic arms, but they also have severe limitations. This paper suggests incorporating series clutch actuators into a gravity compensated arm. Consequently, gravity should not limit the isotropically achievable force anymore and in the case of power outage the arm keeps its position. The benefits and limitations of a series clutch actuator in a gravity compensated arm are discussed, and a prototype of such an arm is presented. Commercially available magnetic friction clutches are used. Preliminary experiments demonstrate that the safety can be increased.