• DocumentCode
    1847969
  • Title

    Cooler scanner technology [cement plant control]

  • Author

    Smith, C. ; Burke, K.J.

  • Author_Institution
    Pretoria Portland Cement, South Africa
  • fYear
    1998
  • fDate
    17-21 May 1998
  • Firstpage
    391
  • Lastpage
    402
  • Abstract
    Pretoria Portland Cement (PPC) is the largest of three cement manufacturers in South Africa. In total PPC holds approximately 45% of the total cement market in the country and also exports cement to neighbouring countries. The company was founded in 1892 and currently operates seven cement factories and one lime factory. The latest of the cement factories is the Dwaalboom factory located 360 km west of Johannesburg. The factory consists of a five stage preheater kiln with a retrofit controlled flow grate cooler system. A CoolScanner system from FLS Automation was installed on the cooler during the retrofit. None of the operators on the plant were familiar with grate coolers, but with the help of the thermal image generated by the cooler scanner system, they have been able to effectively control the process without any significant difficulties. The system has enabled them to eliminate the formation of red rivers and localised air blow through on the grates. The thermal image facilitates much better control on the cooler and secondary air temperature thus resulting in process stability and optimisation. It is the general feeling at PPC that without the cooler scanner system it would be much more difficult to operate and control the grate cooler and therefore this system will become part of the standard installation with any grate cooler system
  • Keywords
    cement industry; cooling; image sensors; optimal control; process control; stability; thermal variables control; CoolScanner system; Portland cement; South Africa; cement plant control; flow grate cooler system; heating process control; localised air blow; preheater kiln; process optimisation; process stability; red rivers; retrofit project; secondary air temperature; thermal image; Africa; Automatic control; Automatic generation control; Control systems; Image generation; Kilns; Manufacturing automation; Process control; Production facilities; Temperature control;
  • fLanguage
    English
  • Publisher
    ieee
  • Conference_Titel
    Cement Industry Technical Conference, 1998. 40th Conference Record. 1998 IEEE/PCA
  • Conference_Location
    Rapid City, SD
  • ISSN
    1079-9931
  • Print_ISBN
    0-7803-3941-X
  • Type

    conf

  • DOI
    10.1109/CITCON.1998.679259
  • Filename
    679259