DocumentCode :
1848865
Title :
Miniature on-chip spiral inductor RFID tag antenna fabricated with metal layer of standard CMOS process for biosensor applications
Author :
Kim, Boram ; Uno, Shigeyasu ; Nakazato, Kazuo
Author_Institution :
Dept. of Electircal & Comput. Sci., Nagoya Univ., Nagoya, Japan
fYear :
2011
fDate :
12-16 Sept. 2011
Firstpage :
925
Lastpage :
928
Abstract :
On-chip tag antenna has been designed and implemented for wireless biosensor system based on complementary metal oxide semiconductor (CMOS) integrated circuit. The two types of square shaped on-chip spiral inductors were fabricated with the outermost diameter of 6.3 mm and 3 mm, and innermost diameter of 3.0 mm and 1.5 mm, respectively. The maximum modulation depth values 3.5, and 0.43, were confirmed by the load modulation measurement. The 212 kHz amplitude shift keying (ASK) transmission was shown in pork belly. The chip was fabricated using 1.2 μm standard CMOS technology.
Keywords :
CMOS integrated circuits; amplitude shift keying; biosensors; radiofrequency identification; CMOS integrated circuit; amplitude shift keying; biosensor; miniature RFID tag antenna; on-chip RFID tag antenna; spiral inductor RFID tag antenna; Antenna measurements; Antennas; Inductors; Modulation; Radiofrequency identification; Spirals; System-on-a-chip;
fLanguage :
English
Publisher :
ieee
Conference_Titel :
Antennas and Propagation in Wireless Communications (APWC), 2011 IEEE-APS Topical Conference on
Conference_Location :
Torino
Print_ISBN :
978-1-4577-0046-0
Type :
conf
DOI :
10.1109/APWC.2011.6046817
Filename :
6046817
Link To Document :
بازگشت