Automatic amplitude adjustment of the pacemaker output voltage

Author

Fröhlich, R. ; Bolz, A. ; Hardt, R. ; Hubmann, M. ; Schaldach, M.

Author_Institution

Dept. for Biomed. Eng., Friedrich-Alexander-Univ., Erlangen, Germany

fYear

1994

fDate

3-6 Nov 1994

Firstpage

55

Abstract

Subthreshold pacing may threaten the life of the patient. In order to avoid this risk, the pacemaker should be able to check the effectiveness of its pacing pulse. Therefore, the aim of this work was to develop an algorithm for automatic amplitude adjustment (AAA), which is based on the measurement of the ventricular evoked response (VER). In clinical investigations the AAA for the VVI-mode was tested using an external system, consisting of an external programmable pacemaker (EDP 30 A, BIOTRONIK) and a laptop. The algorithm has been checked during 5 pacemaker implantations. The results show, that the system detects “no capture” reliably. During each investigation the threshold was measured automatically. The measured threshold voltage was reproducible equal to the value determined by the physician before

Keywords

biocontrol; pacemakers; voltage control; BIOTRONIK; VVI-mode; automatic amplitude adjustment algorithm; external programmable pacemaker; measured threshold voltage; no capture detection; pacemaker implantations; pacemaker output voltage; pacing pulse effectiveness checking; patient life threat; ventricular evoked response measurement; Biomedical engineering; Biomedical measurements; Frequency; Myocardium; Pacemakers; Portable computers; Pulse measurements; System testing; Threshold voltage; Voltage measurement;

fLanguage

English

Publisher

ieee

Conference_Titel

Engineering in Medicine and Biology Society, 1994. Engineering Advances: New Opportunities for Biomedical Engineers. Proceedings of the 16th Annual International Conference of the IEEE

Conference_Location

Baltimore, MD

Print_ISBN

0-7803-2050-6

Type

conf

DOI

10.1109/IEMBS.1994.412107

Filename

412107