Impact of particle distribution on the electrical conductivity of epoxy nanocomposites

Author

Tsekmes, I.A. ; Kochetov, R. ; Morshuis, P.H.F. ; Smit, J.J.

Author_Institution

Dept. of Electr. Sustainable Energy, Delft Univ. of Technol., Delft, Netherlands

fYear

2015

fDate

7-10 June 2015

Firstpage

337

Lastpage

340

Abstract

In this paper, the effect of particle distribution on the electrical conductivity of epoxy - boron nitride nanocomposites is investigated. Nanocomposites were produced with three different techniques and the particle distribution and dispersion in the samples were investigated by scanning electron microscopy. The analysis showed that in all samples the particles are effectively dispersed but they are differently distributed. Conduction current measurements were performed to evaluate the electrical conductivity of the nanocomposites. The results suggest that the electrical conductivity of nanocomposites greatly depends on the particle distribution. A better particle distribution leads to lower conductivity´ values.

Keywords

III-V semiconductors; boron compounds; electrical conductivity; filled polymers; nanocomposites; nanoparticles; resins; scanning electron microscopy; wide band gap semiconductors; BN; conduction current measurements; electrical conductivity; epoxy-boron nitride nanocomposites; particle distribution; scanning electron microscopy; Boron; Conductivity; Current measurement; Dielectrics; Nanocomposites; Polymers; Solvents; boron nitride; electrical conductivity; epoxy; nanocomposites; particle distribution;

fLanguage

English

Publisher

ieee

Conference_Titel

Electrical Insulation Conference (EIC), 2015 IEEE

Conference_Location

Seattle, WA

Print_ISBN

978-1-4799-7352-1

Type

conf

DOI

10.1109/ICACACT.2014.7223608

Filename

7223608