Title :
Mesoporous Cu/SAB-15 as potential catalysts for SCR NOx by CO
Author :
Li, Yi-Ling ; Su, En-Chin ; Tseng, Hui-Hsin
Author_Institution :
Dept. of Occupational Safety & Health, Chung Shan Med. Univ., Taichung, Taiwan
Abstract :
Selective catalytic reduction (SCR) of nitrogen oxide (NO) technology has widely applied in a combustion process to decline the concentration of NO due to its impact on the environments concerns. In this study, mesoporous SBA-15 was used as support material to load Cu catalyst to undergo the DeNOx reaction by CO. Cu/SBA-15 catalyst were prepared by polyol method and investigated by XRD, TEM and FTIR. The results show that the NO conversion over Cu/SBA-15 catalysts is about 20% at 400°C, which is higher than the values for other Cu-based catalysts supported on Al2O3 support material.
Keywords :
Fourier transform spectroscopy; X-ray diffraction; catalysts; chemical engineering; infrared spectroscopy; porosity; transmission electron microscopy; Al2O3; CO; FTIR; NO; SBA-15; SCR; TEM; XRD; combustion process; mesoporous catalysts; nitrogen oxide technology; selective catalytic reduction; temperature 400 C; Aging; Aluminum oxide; Copper; Mesoporous materials; Surface morphology; Thyristors; CO; Catalytic Oxidation; Catalytic Reduction; NO; SBA-15;
Conference_Titel :
Chemistry and Chemical Engineering (ICCCE), 2010 International Conference on
Conference_Location :
Kyoto
Print_ISBN :
978-1-4244-7765-4
Electronic_ISBN :
978-1-4244-7766-1
DOI :
10.1109/ICCCENG.2010.5560367
