Wiggler insertion of the PEP-II B-Factory LER

Author

Heim, J. ; Bertolini, L. ; Dressler, Judson ; Hobson, Brett ; Kendall, M. ; O´Connor, Thomas ; Stoeffl, W.

Author_Institution

Lawrence Livermore Nat. Lab., CA

Volume

1

fYear

1995

fDate

1-5 May 1995

Firstpage

527

Abstract

The Low Energy Ring (LER) of the PEP-II B Factory at SLAC employs two identical wiggler insertions for emittance control and extra damping with each insertion designed to absorb 400 kW of synchrotron radiation. The wiggler is a set of individual iron core dipoles designed to operate at 1.6 T. The basic variant will include nine 0.4-m length magnets and two 0.2-m length magnets. A copper vacuum chamber is used with continuous antechambers connected to both sides of the beam chamber via slots. Synchrotron radiation dump surfaces and distributed vacuum pumping are located in both antechambers. We describe the design and analysis of the vacuum chamber, dump and magnets

Keywords

accelerator magnets; beam handling techniques; colliding beam accelerators; electromagnets; electron accelerators; storage rings; vacuum apparatus; vacuum pumps; wigglers; 0.2 m; 0.4 m; 1.6 T; 400 kW; Cu; Fe; Low Energy Ring; PEP-II B-Factory LER; SLAC; accelerator magnets; beam chamber; continuous antechambers; core dipoles; distributed vacuum pumping; dump surfaces; electron storage ring; emittance control; extra damping; synchrotron radiation; vacuum chamber; wiggler insertion; Copper; Damping; Heating; Iron; Laboratories; Magnetic cores; Magnets; Production facilities; Synchrotron radiation; Undulators;

fLanguage

English

Publisher

ieee

Conference_Titel

Particle Accelerator Conference, 1995., Proceedings of the 1995

Conference_Location

Dallas, TX

Print_ISBN

0-7803-2934-1

Type

conf

DOI

10.1109/PAC.1995.504708

Filename

504708