DocumentCode :
1868192
Title :
HOM-free linear accelerating structure for e+e linear collider at C-band
Author :
Shintake, T. ; Kubo, K. ; Matsumoto, H. ; Takeda, O.
Author_Institution :
Stanford Linear Accel. Center, Stanford Univ., CA, USA
Volume :
1
fYear :
1995
fDate :
1-5 May 1995
Firstpage :
649
Abstract :
The HOM-free linear acceleration structure using the choke mode cavity (damped cavity) is now under design for the e+e- linear collider project at C-band frequency (5712 MHz). Since this structure shows a powerful damping effect on most or all HOMs, there is no multibunch problem due to long range wakefields. The structure will be equipped with microwave absorbers in each cell and also the in-line dummy load in the last few cells. The straightness tolerance for a 1.8 m long structure is looser than 30 μm for the 25% emittance dilution limit, which can be achieved by standard machining and braising techniques. Since it has good vacuum pumping conductance through annular gaps in each cell, instabilities due to the interaction of the beam with the residual-gas and ions can be minimized
Keywords :
accelerator RF systems; accelerator cavities; colliding beam accelerators; electron accelerators; linear colliders; vacuum pumps; 1.8 m; 5712 MHz; C-band; HOM-free linear accelerating structure; RF systems; annular gaps; choke mode cavity; damped cavity; emittance dilution limit; higher-order mode free structure; in-line dummy load; microwave absorbers; positron+electron linear collider; straightness tolerance; vacuum pumping conductance; Acceleration; Damping; Frequency; Inductors; Laboratories; Linear accelerators; Linear particle accelerator; Machining; Particle beams; Pumps;
fLanguage :
English
Publisher :
ieee
Conference_Titel :
Particle Accelerator Conference, 1995., Proceedings of the 1995
Conference_Location :
Dallas, TX
Print_ISBN :
0-7803-2934-1
Type :
conf
DOI :
10.1109/PAC.1995.504745
Filename :
504745
Link To Document :
بازگشت