A voltage and frequency droop control method for parallel inverters

In this paper, a new control method for the parallel operation of one or several inverters in an island grid or the mains is described. Frequency and voltage control, including mitigation of voltage harmonics, are achieved without the need for any common control circuitry or communication between the inverters. Each inverter supplies a current that is the result of the voltage difference between a reference AC voltage source and the grid voltage across a virtual impedance with real and/or imaginary parts. The reference AC voltage source is synchronised with the grid, with a phase shift, depending on the difference between nominal and real grid frequency. A detailed analysis show that this approach has superior behaviour in comparison with the existing droop control methods, considering the mitigation of voltage harmonics, short-circuit behaviour and, in the case of a non-negligible line resistance, the ´efficient´ control of frequency and voltage. Experiments show the behaviour of the method for an inverter feeding a highly distorted load and during the connection of two parallel inverters in operation.