DocumentCode
1882703
Title
A new tuning method for traveling wave structures
Author
Khabiboulline, T. ; Puntus, V. ; Dohlus, M. ; Holtkamp, N. ; Kreps, G. ; Ivanov, S. ; Jin, K.
Author_Institution
Inst. for Nucl. Res., Moscow, Russia
Volume
3
fYear
1995
fDate
1-5 May 1995
Firstpage
1666
Abstract
At DESY S-Band accelerating structures have been under development since 1993. Fourteen 5.2 meter long sections have to be replaced in the injector linac (LINAC II) and overall four 6 meter long sections have to be build for the S-Band test facility at DESY. A new tuning procedure for the accelerating structure after brazing has been developed which uses bead-pull field distribution measurements instead of a detuning plunger. Amplitude and phase of the field are measured simultaneously along the structure without touching the surface on a 13 meter long horizontal bench
Keywords
accelerator cavities; DESY S-Band accelerating structures; S-Band test facility; accelerating structure; bead-pull field distribution measurements; detuning plunger; injector linac; traveling wave structures; tuning procedure; Acceleration; Frequency measurement; Linear particle accelerator; Magnetic field measurement; Needles; Phase measurement; Reflection; Scattering; Time measurement; Tuning;
fLanguage
English
Publisher
ieee
Conference_Titel
Particle Accelerator Conference, 1995., Proceedings of the 1995
Conference_Location
Dallas, TX
Print_ISBN
0-7803-2934-1
Type
conf
DOI
10.1109/PAC.1995.505321
Filename
505321
Link To Document