DocumentCode
1883585
Title
Cell Balancing Circuit Implementation with DC/DC Converters Using Super Capacitor Equivalent Circuit Parameters
Author
Jang, Jaehoon ; Nam, Junghyun ; Yoo, Jiyoon
Author_Institution
Dept. of Electr. Eng., Korea Univ., Seoul
fYear
2007
fDate
9-12 Sept. 2007
Firstpage
646
Lastpage
653
Abstract
Supercapacitors, also known as ultracapacitors, offer an alternative source that substitute or operate in parallel with batteries for motor drive in hybrid electric vehicles (HEV). The supercapacitors have to be series-connected with 60 ones, which have a 162 V specification (2.7 V per cell), in a pack for applying to HEV. As the impedance of each cell in a pack is different from each others, a cell balancing circuit is mandatory for stable operation. This paper presents electrical equivalent circuit parameters of supercapacitors. After that, several existing cell balancing methods and their advantages and disadvantages are discussed using the parameters. This paper also presents a cell balancing method with flying capacitor and DC/DC converter. The presented method to design a cell balancing circuit with flying capacitor and DC/DC converter by using the electrical equivalent circuit of supercapacitor is an advantageous one because it is easy to simulate, save time and cost.
Keywords
DC-DC power convertors; battery powered vehicles; equivalent circuits; hybrid electric vehicles; supercapacitors; DC-DC converter; battery hybrid electric vehicle; cell balancing circuit implementation; super capacitor equivalent circuit parameter; voltage 162 V; Batteries; Capacitors; Circuit simulation; DC-DC power converters; Design methodology; Equivalent circuits; Hybrid electric vehicles; Impedance; Motor drives; Supercapacitors;
fLanguage
English
Publisher
ieee
Conference_Titel
Vehicle Power and Propulsion Conference, 2007. VPPC 2007. IEEE
Conference_Location
Arlington, TX
Print_ISBN
978-0-7803-9760-6
Electronic_ISBN
978-0-7803-9761-3
Type
conf
DOI
10.1109/VPPC.2007.4544203
Filename
4544203
Link To Document