Title :
Study on Numerical Simulation and Experiment of Titanium Alloy for High Speed Milling
Author :
Wu Hong-bing ; Zhi-Xin, Jia ; Xue-Chang, Zhang ; Liu Gang
Author_Institution :
Sch. of Mech. & Energy, Zhejiang Univ., Ningbo, China
Abstract :
Aim at the difficulty of cutting for titanium alloy, the 3D finite element model has been established. The high speed cutting has been simulated using the established model. The chip formation and the cutting force have been analyzed. In the same condition, the cutting experiment has been carried ou. Through the comparison, the result of simulation agrees with the result of experiment well. It proves that the finite element model is correct, and the finite model can be used to investigate the optimization of cutting parameters.
Keywords :
aluminium alloys; cutting; finite element analysis; milling; titanium alloys; vanadium alloys; work hardening; yield strength; 3D finite element model; TiAlV; chip formation; cutting parameter optimization; high speed milling; numerical simulation; strain hardening; titanium alloy; yield strength; Capacitive sensors; Equations; Finite element methods; Machining; Milling; Numerical simulation; Plastics; Stress; Temperature sensors; Titanium alloys; Numerical simulation; Titanium alloy; finite element model; high speed milling;
Conference_Titel :
Intelligent Computation Technology and Automation, 2009. ICICTA '09. Second International Conference on
Conference_Location :
Changsha, Hunan
Print_ISBN :
978-0-7695-3804-4
DOI :
10.1109/ICICTA.2009.303
