Title :
Study on preparation of amorphous nano-silica from coal gangue
Author :
Guozhong, Xu ; Shaofeng, Li ; Xiuying, Pan ; Guiying, Xu ; Junguo, Zhao ; Bai, Xi
Author_Institution :
Shool of Chem. Eng., Univ. of Sci. & Technol. liaoning, Anshan, China
Abstract :
Nano-sized amorphous silica was prepared using a gas-liquid phase method. Coal gangue, sulphuric acid with 98% in mass and calcium fluoride were used as starting materials. The phase, chemical structural characteristic and the morphology of production were investigated by infrared spectrophotometry, XRD and TEM, respectively. The main effect facts of production yield was systematically discussed. Results show that the maximum production yield of achive 17.9wt%, when the mass of coal gangue and CaF2 is 3.00g and 8.00g, the volume of sulphuric acid with 98% in mass is 23ml and the optimized reaction conditions are the reaction temperature of 85°C, the reaction time of 2h, the particle size of coal gangue of about 200 mesh. the production exhibits the characteristic of amorphous silica dioxide of molecular structure. The morphology of amorphous silica dioxide exhibits flake with thichness size 50-100 nm under TEM.
Keywords :
X-ray diffraction; calcium compounds; chemical engineering; chemical reactions; industrial waste; materials preparation; nanostructured materials; particle size; spectrophotometry; sulphur compounds; transmission electron microscopy; TEM; XRD; calcium fluoride; chemical structural characteristic; coal gangue; flake; gas-liquid phase method; infrared spectrophotometry; nanosized amorphous silica; optimized reaction conditions; particle size; production yield; starting materials; sulphuric acid; temperature 85 degC; time 2 h; Ash; Calcium; Chemicals; Silicon compounds; Coal gangue; amorphous silica; gas/liquid phase method;
Conference_Titel :
Materials for Renewable Energy & Environment (ICMREE), 2011 International Conference on
Conference_Location :
Shanghai
Print_ISBN :
978-1-61284-749-8
DOI :
10.1109/ICMREE.2011.5930638