The Damping Ring for Novosibirsk Φ- and B-factories

Author

Anashin, V.V. ; Belomestnykh, S.E. ; Didenko, A.A. ; Dikansky, N.S. ; Grishanov, B.I. ; Ivanov, P.M. ; Kiselev, V.A. ; Kudelainen, V.I. ; Kuznetsov, N.A. ; Lebedev, V.A. ; Militsin, B.L. ; Mishnev, S.I. ; Parkhomchuk, V.V. ; Voroshilov, A.N. ; Zakhvatkin,

Author_Institution

Budker Inst. of Nucl. Phys., Novosibirsk, Russia

fYear

1993

fDate

17-20 May 1993

Firstpage

2022

Abstract

The Damping Ring is designed to provide accumulation, cooling and extraction of electron and positron beams at an energy of 510 MeV with a particle production rate of 2×10¹⁰ per second for injection into the Φ-factory and (after additional acceleration) into the B-factory. The lattice consists of four symmetrical quadrants. The magnetic field polarity does not change by changing the particle type. To provide a short bunch length (σ≃5 mm) two warm cavities of 800 kV total RF voltage are used. The single turn injection scheme with orbit bump and horizontal kick is used. The general parameters and features of the Damping Ring are presented. The state of ring design and construction is discussed

Keywords

beam handling equipment; beam handling techniques; electron accelerators; storage rings; 510 MeV; 800 kV; Damping Ring; Novosibirsk Φ factory; Novosibirsk B factory; RF system; bunch length; design; electron beam; extraction; injection; magnetic field polarity; magnets; positron beam; single turn injection; Acceleration; Cooling; Damping; Electron beams; Lattices; Particle beam injection; Particle beams; Particle production; Positrons; Structural beams;

fLanguage

English

Publisher

ieee

Conference_Titel

Particle Accelerator Conference, 1993., Proceedings of the 1993

Conference_Location

Washington, DC

Print_ISBN

0-7803-1203-1

Type

conf

DOI

10.1109/PAC.1993.309209

Filename

309209