DocumentCode
1971664
Title
Notice of Retraction
Design on the Measuring System of Bearing Thickness
Author
Zhao Jin ; Shan Yuekang ; Zhao Jieang
Author_Institution
Coll. of Quality & Safety Eng., China Jiliang Univ., Hangzhou, China
fYear
2010
fDate
22-23 June 2010
Firstpage
288
Lastpage
290
Abstract
Notice of Retraction
After careful and considered review of the content of this paper by a duly constituted expert committee, this paper has been found to be in violation of IEEE´s Publication Principles.
We hereby retract the content of this paper. Reasonable effort should be made to remove all past references to this paper.
The presenting author of this paper has the option to appeal this decision by contacting TPII@ieee.org.
In this paper, it designs a measuring system of bearing thickness which is based on the four elements of the measuring system. It´s using v-shaped blocks to achieve high-precision semi-automatic positioning of the bearing. It is using differential inductive sensor for measurement, the signal has processed by AD698 firstly, then through analog-to-digital conversion, the signal input into SCM, SCM control the system, after calculating the input signal, LCD displays the measurement results, and measurement data will be stored by the USB protocol to USB flash disk at the same time. This bearing thickness detection system has high degree of accuracy, low cost and suited to workshop casual inspection.
After careful and considered review of the content of this paper by a duly constituted expert committee, this paper has been found to be in violation of IEEE´s Publication Principles.
We hereby retract the content of this paper. Reasonable effort should be made to remove all past references to this paper.
The presenting author of this paper has the option to appeal this decision by contacting TPII@ieee.org.
In this paper, it designs a measuring system of bearing thickness which is based on the four elements of the measuring system. It´s using v-shaped blocks to achieve high-precision semi-automatic positioning of the bearing. It is using differential inductive sensor for measurement, the signal has processed by AD698 firstly, then through analog-to-digital conversion, the signal input into SCM, SCM control the system, after calculating the input signal, LCD displays the measurement results, and measurement data will be stored by the USB protocol to USB flash disk at the same time. This bearing thickness detection system has high degree of accuracy, low cost and suited to workshop casual inspection.
Keywords
analogue-digital conversion; inductive sensors; liquid crystal displays; machine bearings; thickness measurement; LCD display; SCM control; USB flash disk; USB protocol; analog-to-digital conversion; bearing thickness detection system; bearing thickness measuring system designs; differential inductive sensor; high precision semiautomatic positioning; signal measurement data; v-shaped blocks; workshop casual inspection; Accuracy; Measurement uncertainty; Measurement units; Position measurement; Probes; Thickness measurement; Universal Serial Bus; bearing thickness; differential inductive sensor; measuring accuracy; measuring method; measuring objects; measuring system; the unit of measurement;
fLanguage
English
Publisher
ieee
Conference_Titel
Intelligent Computing and Cognitive Informatics (ICICCI), 2010 International Conference on
Conference_Location
Kuala Lumpur
Print_ISBN
978-1-4244-6640-5
Type
conf
DOI
10.1109/ICICCI.2010.50
Filename
5565976
Link To Document