DocumentCode
1974417
Title
All MOS transistors bandgap reference using chopper stabilization technique
Author
Roh, H.D. ; Roh, Jeongjin ; Duan, Duanquanzhen Q Z
Author_Institution
Dept. of Electr. Eng., Hanyang Univ., Ansan, South Korea
fYear
2010
fDate
22-23 Nov. 2010
Firstpage
353
Lastpage
357
Abstract
A 0.6-V, 8-μW bandgap reference without BJTs is realized in the standard CMOS 0.13μm technology. All MOS transistors bandgap reference circuit with very low supply voltage 0.6V is designed. The chopper stabilization technique is used to improve the accuracy of the bandgap reference voltage. The measurement results have confirmed that the chopper stabilization technique reduces bandgap voltage error from 100mV to 30mV comparing to the one without chopper stabilization technique.
Keywords
CMOS integrated circuits; MOSFET; choppers (circuits); reference circuits; CMOS technology; MOS transistors bandgap reference circuit; bandgap reference voltage; chopper stabilization; power 8 muW; size 0.13 micron; voltage 0.6 V; voltage 100 mV to 30 mV; CMOS integrated circuits; Choppers; Frequency modulation; MOSFETs; Noise; Operational amplifiers; Photonic band gap; Bandgap reference; all MOS transistors; chopper stabilization technology;
fLanguage
English
Publisher
ieee
Conference_Titel
SoC Design Conference (ISOCC), 2010 International
Conference_Location
Seoul
Print_ISBN
978-1-4244-8633-5
Type
conf
DOI
10.1109/SOCDC.2010.5682897
Filename
5682897
Link To Document