DocumentCode :
1976507
Title :
Magnet costs for the Advanced Light Source
Author :
Tanabe, Jack ; Krupnick, Jim ; Hoyer, Egon ; Paterson, Alan
Author_Institution :
Lawrence Berkeley Lab., California Univ., CA, USA
fYear :
1993
fDate :
17-20 May 1993
Firstpage :
2850
Abstract :
The Advanced Light Source (ALS) accelerator is now completed. The numerous conventional magnets required for the booster ring, the storage ring and the low and high energy transfer lines were installed. This paper summarizes the various costs associated with the quantity fabrication of selected magnet families. These costs include the costs of prototypes, tooling, coil and core fabrication, assembly and magnetic measurements. Brief descriptions of the magnets and specialized requirements for magnetic measurements are included in order to associate the costs with the relative complexities of the various magnet systems
Keywords :
beam handling equipment; costing; electromagnets; electron accelerators; storage rings; 1.5 GeV; ALS accelerator; Advanced Light Source; assembly; booster ring; coil fabrication; core fabrication; high energy transfer line; low energy transfer line; magnet costs; magnet families; magnetic measurements; prototypes; quantity fabrication; storage ring; tooling; Assembly; Coils; Costs; Energy exchange; Fabrication; Light sources; Magnetic cores; Magnetic variables measurement; Prototypes; Storage rings;
fLanguage :
English
Publisher :
ieee
Conference_Titel :
Particle Accelerator Conference, 1993., Proceedings of the 1993
Conference_Location :
Washington, DC
Print_ISBN :
0-7803-1203-1
Type :
conf
DOI :
10.1109/PAC.1993.309482
Filename :
309482
Link To Document :
بازگشت