Robust Speed Control of PMSM using Generalized Predictive and Direct Torque Control Techniques

Author

Hassaine, S. ; Moreau, S. ; Ogab, C. ; Mazari, B.

Author_Institution

Univ. de Poitiers, Poitiers

fYear

2007

fDate

4-7 June 2007

Firstpage

1213

Lastpage

1218

Abstract

This paper introduces a generalized predictive controller (GPC) for the speed control of a PMSM. The performance of the proposed controller is evaluated in simulation and compared with a IP controller. The stator flux linkage and electromagnetic torque are controlled by (DTC) strategy. For the speed regulation, the generalized predictive control strategy is used. Simulation results indicate that the proposed (GPDTC) is reliable and effective for the speed control of the PMSM over a wide range of operations of the PMSM drive.

Keywords

electromagnetic forces; machine control; permanent magnet motors; predictive control; robust control; stators; synchronous motors; torque control; velocity control; IP controller; PMSM; direct torque control techniques; electromagnetic torque; generalized predictive control techniques; permanent magnet synchronous motors; robust speed control; stator flux linkage; Control systems; Inverters; Nonlinear control systems; Optimal control; Predictive control; Robust control; Sliding mode control; Stators; Torque control; Velocity control;

fLanguage

English

Publisher

ieee

Conference_Titel

Industrial Electronics, 2007. ISIE 2007. IEEE International Symposium on

Conference_Location

Vigo

Print_ISBN

978-1-4244-0754-5

Electronic_ISBN

978-1-4244-0755-2

Type

conf

DOI

10.1109/ISIE.2007.4374771

Filename

4374771