DocumentCode :
1977418
Title :
Design of temperature acquisition system based on Ethernet
Author :
Wei, Li ; LiangLiang, Cheng ; Min, Yu ; BingBing, Chen
Author_Institution :
Inst. of Inf. & Electron., Zhejiang Sci-Tech Univ., Hangzhou, China
fYear :
2011
fDate :
16-18 Sept. 2011
Firstpage :
1051
Lastpage :
1054
Abstract :
This paper presents a design method of three point temperature acquisition system based on Ethernet, and described the hardware and software design of system in detail.the hardware section mainly describes the principle and use of Ethernet controler DM9000A which is widely used in industry. The software part represents the structure and transplant of the open source TCP / IP protocol stack uIP 1.0 . System completed the design of the Ethernet interface card and developed a software which displays the temperature value on PC.
Keywords :
computerised instrumentation; data acquisition; local area networks; public domain software; temperature measurement; transport protocols; DM9000A; Ethernet controler; Ethernet interface card; hardware design; open source TCP/IP protocol stack; software design; three point temperature acquisition system; uIP 1.0; EPROM; Hardware; IP networks; Internet; Protocols; Registers; Software; ARM; DM9000A; DS18B20; Ethernet; STM32F103ZE;
fLanguage :
English
Publisher :
ieee
Conference_Titel :
Electrical and Control Engineering (ICECE), 2011 International Conference on
Conference_Location :
Yichang
Print_ISBN :
978-1-4244-8162-0
Type :
conf
DOI :
10.1109/ICECENG.2011.6057260
Filename :
6057260
Link To Document :
بازگشت