DocumentCode :
1989064
Title :
The Single Ridge Waveguide Cavity Backed Slot Antenna
Author :
Cloete, JH
Author_Institution :
Department of Electrical and Electronic Engineering, University of Stellenbosch, Stellenbosch 7600, South Africa.
fYear :
1984
fDate :
10-13 Sept. 1984
Firstpage :
175
Lastpage :
180
Abstract :
A highly compact cavity backed slot antenna is described. The antenna consists of a transverse slot in the flat broadwall of a deep single ridge waveguide cavity. Without dielectric loading radiation occurs when the slot length is approximately 0,3¿ compared to 0,5¿ or greater for conventional cavity backed slots. By placing standard dielectric substrate in the ridge waveguide gap the radiation frequency can be significantly further reduced. For example with fibreglass printed circuit board substrate (¿r ¿ 4,8) radiation takes place with the slot length approximately ¿/6. The antenna occupies a rectangular volume of merely ¿/5 × ¿/6 × ¿/12.
Keywords :
Bandwidth; Dielectric materials; Dielectric substrates; Filling; Frequency; Impedance; Loaded antennas; Printed circuits; Slot antennas; Waveguide discontinuities;
fLanguage :
English
Publisher :
ieee
Conference_Titel :
Microwave Conference, 1984. 14th European
Conference_Location :
Liege, Belgium
Type :
conf
DOI :
10.1109/EUMA.1984.333353
Filename :
4132030
Link To Document :
بازگشت