• DocumentCode
    2012596
  • Title

    Fine Bi2Te3 wires fabricated by glass sealed melt spinning

  • Author

    Shiota, I. ; Kohri, H. ; Kato, M. ; Ohsugi, I.J.

  • Author_Institution
    Dept. of Mater. Sci. & Technol., Kogakuin Univ., Tokyo
  • fYear
    2006
  • fDate
    6-10 Aug. 2006
  • Firstpage
    247
  • Lastpage
    251
  • Abstract
    Applying a small size cooling system is essential to avoid thermal noise in the field of micro-electronics. Fine thermoelectric materials are required to construct the system. A glass sealed melt spinning process was attempted to fabricate the fine materials. Bi2Te 3 wires of 75 mum in diameter with oval cross section were successfully obtained. The original electrical resistivity and Seebeck coefficient of the wires were maintained after the process
  • Keywords
    Seebeck effect; bismuth compounds; cooling; electrical resistivity; melt spinning; semiconductor materials; 75 micron; Bi2Te3; Seebeck coefficient; electrical resistivity; fine bismuth telluride wires; fine thermoelectric materials; glass sealed melt spinning; microelectronics; small size cooling system; thermal noise; Blades; Cooling; Crystalline materials; Glass; Mechanical factors; Sealing materials; Spinning; Temperature; Thermoelectricity; Wires;
  • fLanguage
    English
  • Publisher
    ieee
  • Conference_Titel
    Thermoelectrics, 2006. ICT '06. 25th International Conference on
  • Conference_Location
    Vienna
  • ISSN
    1094-2734
  • Print_ISBN
    1-4244-0811-3
  • Electronic_ISBN
    1094-2734
  • Type

    conf

  • DOI
    10.1109/ICT.2006.331361
  • Filename
    4133280
    • Link To Document
    https://search.isc.ac/dl/search/defaultta.aspx?DTC=49&DC=2012596