Analysis of selected properties of measurement channels used in hazardous areas of ships

Author

Dudojc, Boleslaw ; Mindykowski, Janusz

Author_Institution

Fac. of Marine Electr. Eng., Gdynia Maritime Acad., Poland

Volume

2

fYear

1996

fDate

1996

Firstpage

826

Abstract

The paper raises selected problems connected with non-electrical quantity measurements in hazardous areas of ships. The main topic of presented paper is concentrated on simplified analysis of restrictions concerning load characteristics of measurement channels and identification of additional errors occurring the current signal transmission under considered conditions. Mathematical description of above mentioned limitations and also simple and communicative graphical method of determination of an admissible area of operation. Additional errors are based on concrete examples such as temperature measurement on liquid gas tankers

Keywords

calibration; identification; interference suppression; measurement errors; ships; signal processing; temperature measurement; additional errors; current signal transmission; graphical method; hazardous areas; identification; liquid gas tankers; measurement channels; non-electrical quantity measurements; selected properties; ships; simplified analysis; temperature measurement; two-wire measurement channel; Area measurement; Chemical elements; Current measurement; Electrical resistance measurement; Hazardous areas; Marine vehicles; Power measurement; Transmitters; Uninterruptible power systems; Voltage;

fLanguage

English

Publisher

ieee

Conference_Titel

Instrumentation and Measurement Technology Conference, 1996. IMTC-96. Conference Proceedings. Quality Measurements: The Indispensable Bridge between Theory and Reality., IEEE

Conference_Location

Brussels

Print_ISBN

0-7803-3312-8

Type

conf

DOI

10.1109/IMTC.1996.507284

Filename

507284