Title :
Memory design for high temperature radiation environments
Author :
Chen, Tai-Hua ; Clark, Lawrence T. ; Holbert, Keith E.
Author_Institution :
Dept. of Electr. Eng., Arizona State Univ., Tempe, AZ
fDate :
April 27 2008-May 1 2008
Abstract :
This paper presents bulk CMOS memory circuits capable of both ultra-low voltage (subthreshold, i.e., VDD less than the transistor threshold voltage Vth) low power operation and high temperature operation at nominal VDD. One of the memory designs is radiation hardened by design (RHBD) using interleaved DICE storage cells, enclosed transistor geometries, and P-type guard rings. The other is not hardened against radiation. Experimental results are presented showing that the room temperature minimum VDD of the hardened device remains essentially unchanged from the pre-irradiation VDDMIN = 210 mV value after Co-60 irradiation to 4 Mrad(Si). The standby power supply current ISB of the device increases less than 2x from this level of irradiation. The RHBD memory design has been tested to be operational at temperatures of 225degC. The combined effects of high temperature and irradiation are also investigated for both designs.
Keywords :
CMOS memory circuits; high-temperature electronics; integrated circuit design; radiation hardening (electronics); P-type guard rings; bulk CMOS memory circuits; enclosed transistor geometries; high temperature operation; high temperature radiation environments; interleaved DICE storage cells; low power operation; memory design; nominal VDD; radiation hardened by design; CMOS logic circuits; CMOS memory circuits; Doping; Monitoring; Photonic band gap; Radiation hardening; Silicon on insulator technology; Temperature control; Temperature distribution; Threshold voltage;
Conference_Titel :
Reliability Physics Symposium, 2008. IRPS 2008. IEEE International
Conference_Location :
Phoenix, AZ
Print_ISBN :
978-1-4244-2049-0
Electronic_ISBN :
978-1-4244-2050-6
DOI :
10.1109/RELPHY.2008.4558870