DocumentCode :
2051717
Title :
Determination of equivalent circuit parameters of current compensated chokes and their use in filters with an application example
Author :
Ai-Hamid, Moawia ; Vick, Ralf ; Kruger, Max ; Rinkleff, Thomas
Author_Institution :
Inst. of Med. Technol., Otto-von-Guericke-Univ., Magdeburg, Germany
fYear :
2013
fDate :
2-6 Sept. 2013
Firstpage :
1022
Lastpage :
1027
Abstract :
For the operation of electrical equipment the use of power electronic circuits is necessary. These circuits cause conducted interference emission, whereby the electromagnetic compatibility of electronic components is impaired. To prevent these problems the attenuation of various filter concepts based on simulation models and measurement techniques were investigated. This interference can be reduced by using filters. In this article, especially the main part of the conducted interference, which is caused by the common-mode currents, is examined. The individual components of the filter can be picked frequency-selective. By the combination of the individual simulation models, a resulting complete model of the filter circuit can be determined.
Keywords :
electromagnetic compatibility; equivalent circuits; filters; inductors; power electronics; common-mode currents; current compensated chokes; electromagnetic compatibility; equivalent circuit parameters; filters; frequency-selective; interference emission; power electronic circuits; Attenuation; Current measurement; Impedance; Impedance measurement; Inductance; Inductors; Integrated circuit modeling;
fLanguage :
English
Publisher :
ieee
Conference_Titel :
Electromagnetic Compatibility (EMC EUROPE), 2013 International Symposium on
Conference_Location :
Brugge
ISSN :
2325-0356
Type :
conf
Filename :
6653452
Link To Document :
بازگشت