DocumentCode :
2055093
Title :
Influence of oxidation on morphology and electrical properties of LDPE
Author :
Ohama, H. ; Cho, D.-C. ; Mori, T. ; Mizutani, T. ; Ishioka, M.
Author_Institution :
Dept. of Electr. Eng., Nagoya Univ., Japan
fYear :
2001
fDate :
2001
Firstpage :
171
Lastpage :
174
Abstract :
Investigated the influence of oxidation on morphology and impulse breakdown strength of LDPE. The results are summarized as follows. (1) The peak intensity on (110) plane of XRD pattern is increased with the oxidation. (2) The calculated crystal size for (110) plane from XRD pattern does not depend on the degree of oxidation. (3) impulse breakdown strength at 30°C decreases with the progress of oxidation in the low oxidation region, and increases in the high oxidation region. On the other hand, impulse breakdown strength at 90°C decreases with the progress of oxidation in the low and high oxidation region. Although the crystallization due to the oxidation is enhanced, it scarcely effects the change of impulse breakdown strength with the progress of oxidation
Keywords :
X-ray diffraction; electric breakdown; electric strength; oxidation; polyethylene insulation; power cable insulation; 30 to 90 degC; LDPE; XRD pattern; crystallization; electrical properties; high oxidation region; impulse breakdown strength; low oxidation region; morphology; Breakdown voltage; Electric breakdown; Electrical products industry; Morphology; Oxidation; Plastics industry; Polyethylene; Polymers; Spectroscopy; X-ray scattering;
fLanguage :
English
Publisher :
ieee
Conference_Titel :
Electrical Insulating Materials, 2001. (ISEIM 2001). Proceedings of 2001 International Symposium on
Conference_Location :
Himeji
Print_ISBN :
4-88686-053-2
Type :
conf
DOI :
10.1109/ISEIM.2001.973598
Filename :
973598
Link To Document :
بازگشت