Title :
Low-power 1V 5.8 GHz bulk-driven mixer with on-chip balun in 0.18μm CMOS
Author :
Vorst, Daryl Van ; Mirabbasi, Shahriar
Author_Institution :
Dept. of Electr. & Comput. Eng., British Columbia Univ., Vancouver, BC
fDate :
June 17 2008-April 17 2008
Abstract :
Two bulk-driven down-conversion mixers with onchip baluns are presented. The inclusion of the passive balun improves gain and provides impedance matching. Implemented in 0.18 mum CMOS, the mixers operate in the 5.8 GHz ISM band and consume 1 mW from a 1 V supply. The mixer in which the RF signal is applied to the gates of the mixing transistors achieves a measured input-referred P1dB of -14 dBm, an IIP3 of -5.2 dBm, a gain of 13.6 dB, a NF of 26 dB, and an LO-to-RF isolation of greater than 50 dB.
Keywords :
CMOS integrated circuits; baluns; impedance matching; microwave mixers; CMOS; LO-to-RF isolation; bulk-driven down-conversion mixers; frequency 5.8 GHz; impedance matching; low-power bulk-driven mixer; onchip balun; passive balun; voltage 1 V; CMOS digital integrated circuits; Filters; Gain measurement; Impedance matching; Noise measurement; Radio frequency; Tail; Threshold voltage; Topology; Wireless sensor networks; CMOS; Mixer; body effect; bulk-driven; low-voltage; transformer balun;
Conference_Titel :
Radio Frequency Integrated Circuits Symposium, 2008. RFIC 2008. IEEE
Conference_Location :
Atlanta, GA
Print_ISBN :
978-1-4244-1808-4
Electronic_ISBN :
1529-2517
DOI :
10.1109/RFIC.2008.4561417