DocumentCode :
2081520
Title :
Influence of metal inclusions on the breakdown strength of model cables
Author :
Antonischki, J.R. ; Nilsson, U.H. ; Gubanski, S.M.
Author_Institution :
Chalmers Univ. of Technol., Goteborg, Sweden
Volume :
1
fYear :
1997
fDate :
19-22, Oct 1997
Firstpage :
283
Abstract :
For these studies measurements on model cables with an insulation of crosslinked polyethylene (XLPE) with metal particle inclusions were performed. Different particle amounts and dimensions were used. It was shown that the decrease in breakdown strength due to the contamination does not show any strong dependence on the particle size but that it is depending on the contamination density
Keywords :
XLPE insulation; electric breakdown; inclusions; insulator contamination; power cable insulation; XLPE; breakdown strength; cable insulation; contamination density; crosslinked polyethylene; metal inclusions; particle size; Cable insulation; Contamination; Dielectric breakdown; Dielectrics and electrical insulation; Electric breakdown; Filters; Iron; Pollution measurement; Polyethylene; Powders;
fLanguage :
English
Publisher :
ieee
Conference_Titel :
Electrical Insulation and Dielectric Phenomena, 1997. IEEE 1997 Annual Report., Conference on
Conference_Location :
Minneapolis, MN
Print_ISBN :
0-7803-3851-0
Type :
conf
DOI :
10.1109/CEIDP.1997.634614
Filename :
634614
Link To Document :
بازگشت