Design and analysis of the cryopump for the DIII-D upper divertor

A cryocondensation pump for the upper inboard divertor on DIII-D is to be installed in the vacuum vessel in the fall of 1999. The cryopump removes neutral gas particles from the divertor and prevents recycling to the plasma. This pump is designed for a pumping speed of 18,000 l/s at 0.4 mTorr. The cryopump is toroidally continuous to minimize inductive voltages and avoid electrical breakdown during disruptions. The cryopump consists of a 25 mm Inconel tube cooled by liquid helium and is surrounded by nitrogen cooled shields. A segmented ambient temperature radiation/particle shield protects the nitrogen shields. The pump is subjected to a steady state heat load of less than 10 W due to conduction and radiation heat transfer