The AGS Booster high frequency RF system

Author

Sanders, R.T. ; Cameron, P. ; Eng, W. ; Goldman, M.A. ; Jablonski, E. ; Kasha, D. ; Keane, J. ; McNerney, A. ; Meth, M. ; Plotkin, M. ; Puglisi, M. ; Ratti, A. ; Spitz, R.

Author_Institution

Brookhaven Nat. Lab., Upton, NY, USA

fYear

1991

fDate

6-9 May 1991

Firstpage

681

Abstract

A high-level RF system, including a power amplifier and cavity, has been designed and built for the Alternating Gradient Synchrotron (AGS) Booster. It covers a frequency range of 2.4 to 4.2 MHz and will be used to accelerate high-intensity protons, low-intensity polarized protons and heavy ions to the 1.5-GeV level. A total accelerating voltage of up to 90 kV will be provided by two cavities, each having two gaps. The internally cross-coupled, pushpull cavities are driven by an adjacent power amplifier. In order to accommodate beam intensities of up to 0.75*10/sup 13/ protons per bunch, a low plate resistance power tetrode is used. The tube anode is magnetically coupled to one of the cavity´s two parallel cells. The amplifier is a grounded cathode configuration driven by a remotely located solid-state amplifier. It has been tested in the laboratory at full gap voltage with satisfactory results.<>

Keywords

nuclear electronics; proton accelerators; radiofrequency amplifiers; synchrotrons; 2.4 to 4.2 MHz; AGS Booster high frequency RF system; Alternating Gradient Synchrotron; accelerating voltage; beam intensities; full gap voltage; grounded cathode configuration; heavy ions; high-intensity protons; high-level RF system; low plate resistance power tetrode; low-intensity polarized protons; parallel cells; power amplifier; pushpull cavities; remotely located solid-state amplifier; Acceleration; High power amplifiers; Particle beams; Polarization; Power amplifiers; Protons; Radio frequency; Radiofrequency amplifiers; Synchrotrons; Voltage;

fLanguage

English

Publisher

ieee

Conference_Titel

Particle Accelerator Conference, 1991. Accelerator Science and Technology., Conference Record of the 1991 IEEE

Conference_Location

San Francisco, CA, USA

Print_ISBN

0-7803-0135-8

Type

conf

DOI

10.1109/PAC.1991.164405

Filename

164405