Title :
A sealed NML 1 ohm resistor
Author_Institution :
Nat. Meas. Lab., CSIRO, Lindfield, NSW, Australia
Abstract :
Six NML 1 ohm resistors have been mounted in sealed cans. The sealed construction will slow the response of the resistor to temperature variations in the surrounding fluid. It also eliminates the chemical effects of the fluid on the resistor. Possible disadvantages of sealing the resistors are being investigated.
Keywords :
Electric resistance measurement; Measurement standards; Resistors; Seals (stoppers); 1 ohm; O-ring seals; assembly; demountable cans; sealed cans; sealed resistor; sealing failure; standard resistors; temperature variations; time constant power coefficient; transient response; Coils; Electrical resistance measurement; Minerals; Petroleum; Resistors; Rubber; Seals; Structural rings; Temperature distribution; Temperature sensors;
Conference_Titel :
Precision Electromagnetic Measurements Digest, 2000 Conference on
Conference_Location :
Sydney, NSW, Australia
Print_ISBN :
0-7803-5744-2
DOI :
10.1109/CPEM.2000.850898
