DocumentCode :
2138941
Title :
A beam position monitor for AmPS
Author :
Noomen, J. ; Bijleveld, J. ; Kroes, F. ; Sluijk, T. ; Verkooijen, H.
Author_Institution :
NIKHEF-K, Amsterdam, Netherlands
fYear :
1991
fDate :
6-9 May 1991
Firstpage :
1148
Abstract :
The AmPS (Amsterdam Pulse Stretcher) is a 900-MeV electron storage and stretcher ring. Its construction started early 1991. A fast-response, high-resolution stripline-type beam position monitor has been developed for the ring. The monitor has a quasi-elliptic cross section. Its sensing strips have a length of lambda /4; the operating frequency is 2856 MHz. The mechanical construction, the matching of the output ports, and the online calibration system are described. The results of bench measurements as well as measurements with a 500-MeV beam are also presented.<>
Keywords :
electron accelerators; nuclear electronics; particle beam diagnostics; storage rings; AmPS; Amsterdam Pulse Stretcher; beam monitoring; high-resolution stripline-type beam position monitor; online calibration system; particle beam diagnostics; stretcher ring; Assembly; Connectors; Electrodes; Extraterrestrial measurements; Frequency; Impedance; Monitoring; Stripline; Strips; Structural beams;
fLanguage :
English
Publisher :
ieee
Conference_Titel :
Particle Accelerator Conference, 1991. Accelerator Science and Technology., Conference Record of the 1991 IEEE
Conference_Location :
San Francisco, CA, USA
Print_ISBN :
0-7803-0135-8
Type :
conf
DOI :
10.1109/PAC.1991.164562
Filename :
164562
Link To Document :
بازگشت