A low guiding-magnetic-field high power millimeter-wave generator operated in the TM01 mode

Author

Zhu Jun ; Zhang Jun

Author_Institution

Coll. of Optoelectric Sci. & Eng., Nat. Univ. of Defense Technol., Changsha, China

fYear

2008

fDate

6-11 July 2008

Firstpage

1

Lastpage

4

Abstract

An improved high power millimeter wave generator was presented in this paper. It mainly consists of two sections of slow-wave structure (SWS) separated by the drift tube and an output cavity, and it can be operated at a relatively low magnetic field. Its working process is investigated by means of theoretical analysis and PIC simulation, and the results agree well with each other. After optimization, the guiding magnetic field can be lowered greatly as its output power and efficiency be increased. A typical simulation result is that, at the beam parameters of 600 keV and 5.1 kA, and magnetic field of 0.8T, an 8mm microwave with output power near 1GW is generated, the power conversion efficiency is over 25%, and the microwave mode is TM01 mode.

Keywords

magnetic fields; millimetre wave generation; PTC simulation; SWS; TM01 mode operation; beam parameter; current 5.1 kA; drift tube separation; electron volt energy 600 keV; low guiding-magnetic-field high power millimeter-wave generator; magnetic flux density 0.8 T; optimization; output cavity separation; power conversion efficiency; relatively low magnetic field; size 8 mm; slow-wave structure; Magnetic confinement; Magnetic devices; Magnetic separation; Microwave circuits; Microwave devices;

fLanguage

English

Publisher

ieee

Conference_Titel

High Power Particle Beams (BEAMS), 2008 17th International Conference on

Conference_Location

Xian

Type

conf

Filename

6202983