• DocumentCode
    2143941
  • Title

    Circularly Polarized Planar Printed Antenna with Conical Beam

  • Author

    Nesic, Aleksandar ; Brankovic, Veselin ; Radnovic, Ivana

  • Author_Institution
    Insfitute of Microwave Techniques and Electronics, Bulevar M. Pupina 165 b, 11070 Belgrade, Yugoslavia, TEL:+381-11-311-1215, ACA@imtel.co.yu
  • Volume
    2
  • fYear
    1998
  • fDate
    Oct. 1998
  • Firstpage
    607
  • Lastpage
    611
  • Abstract
    The new circularly polarized planar printed antenna concept with conical beam is presented. The proposed concept describes a simple printed structure with omnidirectional pattern and maximum gain of about 6 dBi at the elevation angle from 30° to 60°, having features suitable for various commercial applications. VSWR is less than 1.3 in 10% of operational bandwidth while axial ratio (AR) is less than 6 dB in 10% of operational bandwidth and less than 3dB in 5% of operational bandwidth around 4.6 GHz. Experimental results show good agreement with those obtained by simulation.
  • Keywords
    Antenna radiation patterns; Antennas and propagation; Bandwidth; Dipole antennas; Directive antennas; Europe; Impedance; Microwave antennas; Microwave communication; Polarization;
  • fLanguage
    English
  • Publisher
    ieee
  • Conference_Titel
    Microwave Conference, 1998. 28th European
  • Conference_Location
    Amsterdam, Netherlands
  • Type

    conf

  • DOI
    10.1109/EUMA.1998.338223
  • Filename
    4139278
    • Link To Document
    https://search.isc.ac/dl/search/defaultta.aspx?DTC=49&DC=2143941